CABLE WINCH UM 22.005 Drw.# 223-119
“Timing Chain 5/8″” x 2575, Pos.#16, Drw.#216-041
(#1182/2)” NA.NA.950-240-04
“Valve Nidle for over Flow Valve F46B
(#1182/6)” NA.NA.108-633
“U-Ring N12 17 SIMIRIT for Valve F46B
(#1182/6)” NA.NA.801-035-13
“U-Ring 11,91 x x2,62 NBR70 for Valve F46B
(#1182/6)” NA.NA.801-027-41
“Guide Vane
(#1182/2)” NA.NA.130-201
Net Drum Winch, Type: NETM 6300U
“O-Ring, Pos.#4,Drw.# 28462
(#70-22/1 SMT)” NA.NA.801-032-54
“Soh. Roller bearing 23940C/W33, Pos.#1, Drw.#28463
(#70-22/2 SMT)” NA.NA.801-180-56
“V-ring, V-220A, pos.#3, Drw.#28463
(#70-22/3 SMT)” NA.NA.800-061
Net Drum Winch, Type: NETM 6300U
“Pressure Rel. Valve F212
(#716/2)” NA.NA.365-327-00 or 800-002
HYD.MOTOR M2202-B
“Vane (oversize), Pos.#3, Drw.#106-162
(#70-22/16 SMT)” NA.NA.103-14
“O-Ring 406 x 4 NBR70 SHORE, Pos.#5, Drw.#106-162
(#70-22/2 SMT)” NA.NA.800-044
“Stuffing arr. Pos.#11, Drw.#106-162
(#70-22/1 SMT)” NA.NA.119-309
“O-ring 219,3 x 5,7 NRB70 SHORE
(#70-22/2 SMT)” NA.NA.801-031-54
“Roller bearing SKF NJ226, Pos.#20, Drw.#106-162
(#70-22/2 SMT)” NA.NA.801-159-11
“O-Ring 98,02 x 3,53 NBR 70 NTRIL
(#716/6)” NA.NA.801-029-58
CONTROL VALVE R8\E17
“Stripper AS 30-40-5-8 SIMRIT
(#70-22/15 SMT)” NA.NA.801-052-24
“Bushing, Pos.#13, Drw.# 122-88
(#70-22/4 SMT)” NA.NA.102-598
“Bushing, Pos.#34, Drw.# 122-88
(#70-22/4 SMT)” NA.NA.102-592
Valve E14
“Non Return Valve F133, Pos.#1, Drw.# 133-156
(#70-22/2 SMT)” NA.NA.107-385
“Spring, Pos.#4, Drw.#133-156
(#70-22/2 SMT)” NA.NA.12-195
“O-ring, 100,97 x 5,34 NRB70, Pos.#4, Drw.#133-156
(#70-22/6 SMT)” NA.NA.801-030-28
“O-ring 98,84 x 3,53 NRB70, Pos.#7, Drw.# 133-156
(#70-22/6 SMT)” NA.NA.801-029-57
Type Hydr. Brattvaag/D.M.63, 30 tons, 0-47 m/min
“Seal set for motor M 6300
(#219/3) (716/2)” NA.NA.3401
“Seal kit
(#219/3)” NA.NA.3402
“Brake lining 102 x 9,5 x 3960
(#12/2) (#168/2)” NA.NA.950-073-28
Spooling device
“Piston Ring
(#12/2)” NA.NA.801-441-15 (801-380-15)
“O-Ring 49,5 x 3,00
(#12/2)” NA.NA.801-028-27
“O-Ring 238,00 x 5
(#12/2)” NA.NA.801-177-79
“Guide Vane drawing # 199-197, shaft dia.-170mm, pos.8
(#14/2) (#08/4) (197/2)” NA.NA.197-314
“Pressure reduction valve R11-300-RNMD Drw.196-095 pos.14
(#14/1)” NA.NA.800-782
“O-RING 110,50х5.34 DRAW 171-231
(#1182/10)” NA.NA.801-030-32
“Spring
(#1182/4)” NA.NA.041-796
“Seal Washer
(#1182/3) (#716/100)” NA.NA.801-038-09
“O-Ring
(#1182/8)” NA.NA.801-023-42
Control Valve
“Set of seals for E20 Control Valve
(#168/2) (#236/10 SMT)” NA.NA.2952
“Mantle ring 60x58x7.3 (pos.19 drw. #131-039)
(#1182/3)” NA.NA.801-194-27
“Mantle ring 14x16x3 (pos.24 drw. #131-039)
(#1182/6)” NA.NA.801-195-04
“Packing ring 400-019-4490 (pos.56, drw. #114-24)
(#1182/6)” NA.NA.801-038-29
“Stripper AS 12-20-4-6 SIMRIT
(#1182/6)” NA.NA.801-052-05
“RETAINING RING 30х1,5 (# 95143)
(#1182/6)” NA.NA.801-091-30
“RETAINING RING 50х2 (# 95143)
(#1182/6)” NA.NA.801-091-41
“Piston Guide 35×2,5x170mm
(#1182/2)” NA.NA.950-117
“SEAL RING 400-126-4490
(#1182/6)” NA.NA.801-038-17
“Vane pin, Pos.# 29, Drw.# 111-112 FOR MOTOR 6300B
(#789/32) (#70-22/16 SMT) (#787/16)” NA.NA.102-383
“Stuffing arr Pos.#20, Drw.# 111-112 FOR MOTOR 6300B
(#789/2) (#70-22/2 SMT) (#787/2)” NA.NA.119-365-AB
“Seal ring 330 x 370 x 18
(#789/2)” NA.NA.801-047-32
“Seal Ring
(#789/4)” NA.NA.801-204-65
“O-ring 359,30×5,70 NS1178
(#789/2)” NA.NA.801-031-61
“TALLOW HAMP GASKET 3/8″” а-х110
(#789/2)” NA.NA.950-118-03
“O-Ring, Packing cord dia 4х/1830/577 Pos.#11, Drw.#111-112 FOR MOTOR 6300B
(#789/4) (#70-22/12 SMT)” NA.NA.800-040
“Chain, pos.13 , 10 feet per reel
(#168/2)” NA.NA.950-240-06
“Joint link
(#168/4)” NA.NA.800-928
“Air bleed plug M12 x 1,5
(#168/20) (#716/30)” NA.NA.108-126-02
“Drw.106-161 pos.28 air bleed plug seal 400-021-4490 Dowty
(#168/30)” NA.NA.213-101
“Non return valve P-RVV 30SM-WD, 2,5bar.
(#168/2)” NA.NA.801-381-29
“PRESSURE GAUGE R 1/4″” 0-160 KP/CM2 M/DYSY
(#168/10)” NA.NA.801-244-06
“O-ring
(#168/6) (#70-22/1 SMT)” NA.NA.801-031-58
“O-ring
(#168/6)” NA.NA.801-032-41
“O-ring
(#168/6)” NA.NA.801-032-24
Screw Pump SN 80
“Shaft seal set, SN 80 pos. # 107, #108
(#716/4)” NA.NA.82133
Screw Pump SN 2900
“O-Ring
(#716/6)” NA.NA.801-031-59
“Seal set for motor M 6300
(#219/3) (716/2)” NA.NA.3401
BRATTVAAG HYDRAULIK VALVE E1216/E1288-A
“O-Ring 124,2 x 5,7 Pos. #13 Drw. # 133-155 FOR E14 Valve Pos.#13, Drw.# 133-156
(#236/6 SMT) (#70-22/6 SMT)” NA.NA.801-031-36
“O-Ring 437 x 5,7 Pos. #12 Drw. # 158-021
(#236/4 SMT)” NA.NA.801-031-93
“O-Ring 149,2 x 5,7 Pos. #22 Drw. # 158-021
(#236/4 SMT)” NA.NA.801-031-41
“Packing Cord 1354 x 5,7 Pos. # 24 Drw. # 158-021
(#236/4 SMT)” NA.NA.950-058-14
Brattvaag RETRIEVER WINCHES AKMG 8
“O-Ring 58,74 x 3,53
(#235/1 SMT)” NA.NA.801-029-35
“Safety Valve F106B
(#235/1 SMT)” NA.NA.F106B Drw.# 117-15
For Hyd. motor MG8-B
“Vane G3 (Fagersta W221) (Oversize) Pos.#2, Drw.# 218-005
(#70-22/16 SMT)” NA.NA.094-386
“O-Ring 134,5 x 3 NRB70, Pos.#4, Drw.# 218-005
(#70-22/4 SMT)” NA.NA.801-028-50
“O-ring, 119,20 x 5,7 NBR 70, Pos.#6, Drw.#218-005
(# 715/5) (#70-22/4 SMT)” NA.NA.801-031-35
“Stuffing arr. For motor MG8-B
(#70-22/2 SMT)” NA.NA.107-248
“Vane pin, Pos.# 29, Drw.# 111-112 FOR MOTOR 6300B
(#789/32) (#70-22/16 SMT) (#787/16)” NA.NA.102-383
“O-Ring 215,50 x 3,53 NRB70 Pos.# 15, Drw.# 218-005
(#70-22/2 SMT)” NA.NA.801-029-05
“Roller bearing SKF NU312E Pos.#23, Drw.# 218-005
(#70-22/4 SMT)” NA.NA.801-095-52
TRAWL WINCHES 2-D2M6300U
“Gasket, Pos.# 9, Drw. # 151-291
(#70-22/1 SMT)” NA.NA.151-267
“Gasket, Pos.# 9, Drw. # 159-021
(#70-22/1 SMT)” NA.NA.151-271
“Gasket, Pos.#10, Drw. # 151-291
(#70-22/1 SMT)” NA.NA.151-269
“Gasket, Pos.# 25, Drw. # 194-159
(#70-22/1 SMT)” NA.NA.151-268
“Gasket, Pos.# 12, Drw. # 194-159
(#70-22/2 SMT)” NA.NA.151-266
“Set Collar, Pos.#1, Drw. #108-340
(#70-22/2 SMT)” NA.NA.115-503
“Coupling Bolt, Pos.#2, Drw. #108-340
(#70-22/2 SMT)” NA.NA.108-341
“Bushing, Pos.#3, Drw. #108-340
(#70-22/2 SMT)” NA.NA.102-162
“V-ring V-275A FORSHEDA, Pos.#4, Drw.#159-021
(#70-22/2 SMT) (#1182/4)” NA.NA.800-012
“Seal ring SMIM280 310/15 GACO, Pos.#5, Drw.#159-021
(#70-22/1 SMT)” NA.NA.801-047-24
“Roller bearing NU1052 SKF, Pos.#6, Drw.#159-021
(#70-22/1 SMT)” NA.NA.801-097-34
“Sph.roller bearing 23034CK/W33, Pos.#7, Drw.#151-291
(#70-22/1 SMT)” NA.NA.801-145-14
“Roller bearing 22220С, Pos.#9, Drw.#194-159
(#70-22/2 SMT)” NA.NA.801-129-48
“Rod wiper AS 170-185-10-14 SIMRIT, Pos.#37, Drw.#194-159
(#70-22/2 SMT)” NA.NA.801-053-02
“Sph.roller bearing 23034C/W33, Pos.#4, Drw.#167-121
(#70-22/1 SMT)” NA.NA.801-130-34
“Seal ring DPSM-180-210-15, Pos.#7, Drw.#167-121
(#70-22/1 SMT)” NA.NA.801-047-11
“Seal ring DPSM-100-125-12, Pos.#5, Drw.#208-073 (SNH 2900 R40??? Allweiller pump)
(#08/8) (#70-22/8 SMT)” NA.NA.801-046-43
“3/2 valve Mo tona S560/42 Pos.#7, Drw.# 0001-0441 PEILO TEKNIKK A/S
(#716/2) (#1182/4)” NA.NA.812-071
“Vane FOR M6300
(#1182/2)” NA.NA.92469
“Vane pine ID RRM FOR M6300
(#1182/2)” NA.NA.207126
“Joint link
(#168/4)” NA.NA.800-928
“Chain, pos.13 , 10 feet per reel
(#168/2)” NA.NA.950-240-06
“Saft Seal kit for M6300
(#789/2)” NA.NA.3397
“Bearing NUP214ECP, drw.#208-073
(#08/8)” NA.NA.801-250-58
“Vane standard Pos.#24 Drw.#111-112 FOR MOTOR 6300B
(#70-22/48 SMT) (#789/32) (#787/16)” NA.NA.103-210
“Seal ring 400-014-4490 DOWTY (E20A/R8/R11/–) Pos.#27, Drw.#111-112 FOR MOTOR 6300B AND Pos.#33, Drw.# 106-162 FOR MOTOR M2202-B
(#70-22/12+1 SMT) (#1182/6)” NA.NA.801-038-20
“Roller bearing SKF NU 234, Pos.#32, Drw.# 111-112 FOR MOTOR 6300B
(#70-22/12 SMT)” NA.NA.801-159-29
WINCH DMM6300 15 tons at 0-45m/min N1,2
“Gland 1006
(#787/2)” NA.NA.87-19
“Sealing Ring pos. 1.1 BABSL AS 1x170x200 – 14mm SIMRIT
(#787/2)” NA.NA.801-163-08
WINCH DSM41 15 Tons at 0-65m/min
“Spare Part kit
(#219/2)” NA.NA.92460
“Roller Bearing NU 230 SKF
(#790/2)” NA.NA.801-159-20
“O-Ring 194,2 x 5,7
(#790/4)” NA.NA.801-031-50
“Stuffing box arr.
(#790/2)” NA.NA.119-365-CB
“Gland A806B-150
(#790/2)” NA.NA.094-738
“Packing
(#790/2)” NA.NA.066-770
HYDROMOTOR MG4185-A
“Vane
(#790/32)” NA.NA.89-312
“Vane pir
(#790/32)” NA.NA.102-65
“Packing cord D4 x (1780) 554
(#790/4)” NA.NA.800-041
CARGO WINCH AM 22
“Shaft Seal set for M2202 Hydraulic Motor
(#716/4) (#1182/2)” NA.NA.3399
“Seal kit
(#1182/2)” NA.NA.3398
“Vane Pin, Pos.#1, Drw.#106-162 for Hyd. Motor M2202-B
(#1182/32) (#70-22/8 SMT)” NA.NA.102-146
“Packing
(#1182/6)” NA.NA.75-760
Control Valve E2B, for Cargo Winch AM 22.006
“Non return valve
(#1182/2)” NA.NA.115-123
“Valve Guide
(#1182/2)” NA.NA.57-775
“Spring, Pos.#1
(#1182/2)” NA.NA.42-180
CABLE WINCH UM2202
“Soh. Roller bearing 22220C, Pos.#4, Drw.#167-121
(#70-22/1 SMT)” NA.NA.801-109-48
“Rod wiper AS 120-130-7-10, Pos.#8, Drw.# 167-121
(#70-22/1 SMT)” NA.NA.801-052-62
“Seal Ring DPSM 120-150-12, Pos.#7, Drw.# 167-121
(#70-22/1 SMT)” NA.NA.801-046-52
